Blistering / Thermoforming Equipment

The machine is used for battery blister packaging, cosmetic products in blister packaging. Forming area is 500 × 180 mm. Forming depth is 35 mm. Output is 20 cycles per minute. The blister-packing machine is equipped with the clutch to shut down the machine when any fault. Therefore, the machine never muddle up in production.

Suitable for blister-to-blister sealing. Automatic blister forming cutting sealing in one line. Widely used for different products in blister packing. Suitable for stationery, electronics, toothbrush, batteries, toys, gifts, hardware, tools with plastic-plastic or plastic-card packaging. Production capacity is 15 strokes per minute.

Automatic PVC sheet feeding, blister forming, blister cutting, feeding, blister card sealing in one unit. PLC controlled, parameters are set via HMI on a touchscreen. Widely used in battery blister packing, cosmetic products blister packing, electronic products blister packing, etc. Output is 20 cycles per minute.

BP-250D automatic platen Alu-PVC-Alu (tropical aluminum) blister packing machine can form plastic or aluminum blisters, fill products, form aluminum foil, seal blisters to aluminum foil or dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.

BP-250E/140E automatic platen Alu-Alu blister packing machine can form plastic or aluminum blisters, fill products, seal blisters to aluminum foil and dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.

BP-350A/250A/140A automatic platen Alu-PVC blister packaging machine can form plastic blisters, fill products, seal blisters to aluminum foil or dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 45 cycles per minute.

BP-260A/E automatic platen Alu-PVC / Alu-Alu blister packing machine can form plastic or aluminum blisters, fill products, seal blisters to aluminum foil or dialyzing paper. To operate the machine needs compressed air supply with a pressure of 0.5 - 0.8 MPa. Packing capacity is 15 – 55 cycles per minute.

Automatic Strip Packaging Machine is characterized by advanced structure, high efficiency, low noise and easy operation. It utilizes frequency control to set travel at will, increase the vibration entire column feed mechanism and optical monitoring devices, it can automatically count and filling, seal, imprint batch number, cut the strip.